Home > Windows 98 > Windows 98 Cd Rom Drivers

Windows 98 Cd Rom Drivers


Then alter the registery to point to the setup files, windows will never ask for your windows cd again - Here's the register hack information: http://www.winguides.com/registry/display.php/42/ This is what I do I have three CD ROM drives confirmed working on other computers that I tried putting into this computer and they ALL experience the SAME issue that the guy described was wrong And label it3) Insert first floppy disk into drive and reboot computer.4) Select Setup Windows 98 from the next menu.5) Follow on screen instructions Home | Legal | Links | Contact I think you need to recheck the cables you removed from the CDROM drive and make sure it is visible in BIOS before you continue. http://trigonahosting.com/windows-98/windows-98-se-usb-drivers.html

Remove ALL drives, ALLcontrollers (except FIFOs, which can't be removed,) and the Systemdevice called PCI Bus. See if that finds the CD drive. Some CD-ROM Drivers you can try: Oak Technologies Universal IDE CD-ROM Driver ~ 162Kb Download This will get you into almost all of the IDE CD-ROM Drives on the market. ~ What you need to do now is copy Gscdrom.sys and the associated unzipped driver files to a folder on your Windows 98 Startup Disk and edit its Config.sys and Autoexec.bat files. https://support.microsoft.com/en-us/kb/190303

Windows 98 Not Recognizing Cd Drive

Any advise would be appreciated. 3 answers Last reply Feb 20, 2005 More about recognized AnonymousFeb 20, 2005, 2:21 AM Archived from groups: microsoft.public.win98.gen_discussion (More info?)"Senator" wrote in messagenews:[email protected]> For Slide the drive out of its bay and you ought to be able to find a sticker somewhere on its casing that identifies its unique FCC ID. That's when the CD-Rom dissapeared and I receive "no valid CDROM device drives selected" Now when I boot up, I receive the following: CD-Rom Device Driver for IDE(four Channels) Driver Version The critical updates alter and add files which are unaffected by a restore.

In the above example its "/D:mscd001". (If you had 2 drives fitted the second may be /D:mscd002) The /l:D switch sets a drive letter for your CD-ROM. (In this case Drive Remove it/them.Try doing a restore and roll back your registry to a date before this problem happened. Any suggestions? How To Install Windows 98 Step By Step In Dos Mode Yes, it is Win 98 and I have a newdevelopment.> It appears my strategy was at least helpful.

this may be your solution. Microsoft MSCDEX Extensions Version 2.23 (30Kb Download) The following Pages may provide additional help: The CD-ROM Drivers Guide ~ A Guide to CD-ROM driver resources on the Internet! And it might replace one or more of the files necessary to use the CD-ROM from Windows with an older version.This particular disk contains , in addition to readme files, these a fantastic read Do you have the jumper set for master?

I set the bios to boot from my cd rom first and it does without a problem, I load Windows and everything is going well until windows finds new devices and Windows 98 Download MTMCDAI.386 Windows virtual device driver. And that was the last time that that virtual machine saw the CD drive. A fresh install using a bootable Win98 SE CD does not work.


Windows 8 iso file not recognized as cd rom Ask the experts Windows 7 use CD ROM used for Windows XP 2000 98 or NT More resources Tom's Hardware Around the http://www.tomshardware.com/forum/182304-48-recognized Abraham Maslo **** We use our powers for good, not evil **** Trying to remove your data from the web is like trying to remove pee from a swimming pool Back Windows 98 Not Recognizing Cd Drive can I get rid of the first two,if they aren't necessary to keep 2) how do I get rid of them 3) I think I need to edit the last one How To Install Windows 98 From Cd Step By Step Unfortunately, I can't even reload the OS......

If you have jumpered it correctly on the second system, then it should work. check over here Win98 Installation Planning How To Create A Windows Start Up Disk Installing Windows 98 - Getting Your CD Drive to Work for Installation How To Create A FAT32 Partition on Your In an attempt to have Windows reload the correct driver, I removed the existing driver from the Device Manager. Register now! Windows 98 Startup Disk

Windows 95 Windows 95 does not need a CD-ROM Driver installed as above, as it installs its own driver. But thanks again for your message."Don Phillipson" wrote:> "Senator" wrote in message> news:[email protected]> > > For reasons which I will not get into, the CD ROM driver became corrupted.> In> Then I throw on Windows 95/98 Plus on top of it, do WindowsUpdate, then apply the "UNOFFICIAL Windows98 Second Edition Service Pack 1.6.2" from http://exuberant.ms11.net/98sesp.html if I'm using Win98SE. his comment is here CDROM not recognized Started by newbeee , Apr 21 2005 12:52 AM Page 1 of 4 1 2 3 Next » Please log in to reply 49 replies to this topic

Register now! Windows 98 Iso If you do end up reinstalling from scratch, I recommend making an image of your install CD to install from instead of using the physical CD. Any and all help will be greatly appreciated.

Once reported, our moderators will be notified and the post will be reviewed.

  • Disk format 1.44MB Ver:3.2 1999 Memtek products, INC. 3532003700" It has a read me titled "CD-rom device driver for ATAPI CD-ROM DRIVE".
  • ISO-9660 CD Support and SMARTDRV.EXE Bootdisk Page ~ A selection of DOS Bootdisks with Add-On IDE & SCSI CD-ROM Drivers.
  • Having one work on a system that you are just putting it into can require a few things.
  • Other benefits of registering an account are subscribing to topics and forums, creating a blog, and having no ads shown anywhere on the site.
  • Do you think that could have something to do with it?

If I do a clean install, fdisk and all that stuff, can I start up with the 98se startup disk in floppy drive choosing "without" cdrom support? ( I have to If you load a CDROM driver there, it's possible the drive will vanish in windows.Bob Flag Permalink This was helpful (0) Collapse - Re:Re:Re:Win. 98 won't detect IDE CD-ROM by JMarchi You need to partition and format from the boot disk.Will that wipe everything, including all the bad stuff that I screwed up? Details about any equipment displaying such a label label can be found in the Federal Communications Commission database: Type in the FCC ID as shown above and, so long as the

However, it is not guaranteed that one of these drivers will work with any CD-ROM device. It now appears to work! The boot disk wouldn't run the CD drive at that point anyway so even replacing the windows drivers seemed pointless. weblink I'm so confused The cdr drive works, I can hear the cd reading and running,I loaded everything from it a couple weeks ago when I did a clean install on this

If this contains a line that looks something like … device=c:cdromgscdrom.sys /d:mscd000 /v … and the gscdrom.sys file is where it says it is, you're in luck. I`m not saying that this will help but it might!! Click here to Register a free account now! Thanks, Angus.C Discussion is locked Flag Permalink You are posting a reply to: Win. 98 won't detect IDE CD-ROM The posting of advertisements, profanity, or personal attacks is prohibited.

Its fairly easy to do. Open Device Manager. To learn more and to read the lawsuit, click here. This version unzips drivers to a ramdrive!

utility in Autoexec.bat My question is 1). Flag Permalink This was helpful (0) Collapse - Re:Re:Win. 98 won't detect IDE CD-ROM by silent_g / December 26, 2003 7:52 AM PST In reply to: Re:Win. 98 won't detect IDE A chance to win* connected home tech Enter everyday to increase your chances of winning smart home gadgets like an Amazon Echo or a Ninja Ultima Blender. If it is possible, please, try to install Windows 98SE in a normal way, not via upgrade.

Alicia, Feb 18, 2008 #5 MacAngus Messages: 3 Thanks Alicia - I will try that, although I believe my Windows 98SE CD is an upgrade, so that is why I installed TechSpot Account Sign up for free, it takes 30 seconds. Although I re-booted several times after removing the DM CD ROM entries without success, when I put in a music CD it recognized it, but with difficulty. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged